50 mm x 90 mm x 20 mm FAG 7210-B-TVP angular contact ball bearings

Characteristic cage frequency, FTF:0.44 Hz; Precision class:P0; Product Group:B04144; Dw:4 mm; Mass:0.16 kg; Characteristic outer ring frequency, BPF0:3.75 Hz; Minimum Buy Quantity:N/A; Cr:41.5 kN; C:30 mm; Lw:25.4 mm;

T min.:-20 °C; e:24 mm; A:40 mm; A1:13 mm; Designation of bearing:US209-26G2T20; B:41.2 mm; L:137 mm; N:14mm; T max.:200 °C; C0:20.8 kN;

Stroke:No; Machining:Steel plate cover mo; Grease Type:Standard Grease; Unit Body Material:Cast Iron; Unit, Type:Insert Bearing Unit; Unit, Type:Insert Bearing Unit; Basic Load Rating, Static Rating(N):15400; Days to Ship:Quote; Fit:J7; Seal:Nitrile;

Da max:237 mm; da min:153 mm; E:221 mm; rs min:3 mm; Dynamic load, C:310 kN; Characteristic cage frequency, FTF:0.43 Hz; Mass (without HJ ring):8.61 kg; D:250 mm; Static load, C0:400 kN; B:42 mm;

T min.:-20 °C; T max.:100 °C; C:19.5 kN; s1:20.5 mm; d:23.81 mm; A1:12 mm; Adapter sleeve reference:H2306-15; L:80 mm; Weight:0.89 kg; J:116.5 mm;

B:40 mm; T min.:-20 °C; A2:48 mm; e:16 mm; Designation of bearing:UK310G2H-26; s1:32 mm; J:132 mm; A4:36 mm; L:175 mm; Designation of housing:FS310-;

S:18.8 mm; N:15mm; Designation of bearing:EX207-20G2; s1:36.3 mm; B:37.6 mm; C:25.7 kN; B1:51.1 mm; Weight:1.46 kg; J:130 mm; J1:66 mm;

E:18 mm; L1:30 mm; d:28.58 mm; H:42.9 mm; T max.:200 °C; Designation of bearing:UC206-18G2T20; Weight:1.04 kg; C:19.5 kN; Designation of housing:PA206N-; A:48 mm;

N:18mm; C0:23.2 kN; e:24 mm; Z:64.7 mm; T min.:-20 °C; J:157 mm; A2:56.6 mm; Recommended tightening torque for set screw:16.8 Nm; Weight:2.29 kg; S:19 mm;

A1:27 mm; E:12.5 mm; Designation of housing:PAE207-; H2:93 mm; B1:51.1 mm; C0:15.2 kN; T min.:-20 °C; s1:36.3 mm; G:R1/8"; d:35 mm;

Aa - Cage-Cone Backface Clearance:0.07 in; Design Units:Imperial; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:31100 lbf; Series:6200; Ab - Cage-Cone Frontface Clearance:0.14 in; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (1 million revolutions)6:68800 lbf; Cg - Geometr

C0 - Static Radial Rating:7880 lbf; d:30.163 mm; Cage Type:Stamped Steel; Da - Cup Frontface Backing Diameter:55.88 mm; a - Effective Center Location3:-1.3 mm; Series:08000; Aa - Cage-Cone Backface Clearance:0.5 mm; r - Cup Backface To Clear Radius2:1.02 mm; Cone Part Number:08118; R - Cone Backface

Shape:Bottom Mount; Width T(mm):12; Holder Surface Treatment:Not Provided; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):6; Height H(mm):20 ～ 30; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining;

A1:22 mm; C:9.55 kN; H:30.2 mm; T min.:-20 °C; T max.:200 °C; Recommended tightening torque for set screw:3.5 Nm; G:M6x1; B:22 mm; N:13mm; Z:16.4 mm;

Designation of housing:SP207N-; H:47.6 mm; S:17.5 mm; H1:19 mm; Designation of bearing:SUC207-23; d:36.51 mm; N1:21 mm; A:48 mm; T max.:100 °C; N:17mm;